Description
Slayer Espresso Single Group – Standard configuration Model with colour options
Caffetech Canada is currently offering a twoyear warranty on all slayer models.
Please note that all colour options are depictions of the colour through your computer monitor. This is Care of Slayer‘s product building program. The Slayer catalogue has been supplied in resources as well. Canada will not be responsible for colour shades that do not match your exact expectations . Colours are considered custom options and all custom options. Take up to 2 weeks to complete and much longer if chrome or specified cross leg configurations are requested. Please ensure that you are good to wait the two week requirement as an approximation.
Caffetech Canada presents the Slayer single group espresso machine. In a compact footprint, the Slayer single group packs the same commercial group, steam valves and brew actuators as Its commercial espresso machine lineup. In addition to this, the V3 single group is equipped with a new touchscreen interface that assists in flavour development, profiling, and temperature management. You are looking at one of the best one group espresso machines in the boutique category. This Slayer one group has unprecedented capacity and combines a complete user interaction that heightens the barista experience.
Caffetech Canada rates the Slayer one group as the best designed home espresso machine for utilizing flow control parameters that give you ultimate precision for pre-infusion using its patented needle valve technology. Built on the slogan of “making better coffee “ , Slayer is a subsidiary of the Cimbali group in recent years but still manufactured in Seattle with most of the components from familiar OEM sources in Italy.
Weighing in at around 100 pounds, the slayer one group reeks of quality. It has a tremendous quality of materials used in all its manufacturing. These characteristics are noticeable as you come close and view the small details of the metals. Complete with stainless steel boilers and preheated brew group boiler design, the Slayer is not only energy efficient, but also meticulously laid out in the Interior. The Brew boiler is 600 Watt , 1.6 litre brew boiler – 1300 Watt 3.3 litre Steam and Hot water boiler
Enjoy the best that your espresso has to offer with Slayers signature needle valve flow control. The Single Group divides extraction into multiple stages and manipulates flow rate to highlight the inherent sweetness of espresso. Extreme grind fineness, made possible by patented pre-brew technology, lends to extraordinary body and beautiful Crema. Around the world, professional and amateur baristas alike are making exceptional coffee with the Slayer Single Group offered through CaffeTech.
Ideal for: espresso bars, small restaurants, catering events, your kitchen
Features
Pump: upgraded from gear to rotary vane pump (increases to 9 bars in 1 second, is consistent & tuneable). Can be direct plumb or draw from a water tank, within 1 meter of the machine.
Power switch; located internally for safe, quick repair scenarios.
Power save: “Interrupt Power Save” by moving actuator will interrupt “Power Save” and begin the heat-up process.
Similarly, if machine is set to “Sleep” and enter “Power Save” mode at 3PM––moving the actuator initiates machine
heat-up cycle. Machine automatically re-enters “Power Save” mode 1 hour after the last drink was made.
Shot counter: one resettable shot counter.
A new heating system lets the machine heat both boilers simultaneously for better performance. To take full advantage of the
new system’s capabilities, Slayer developed a new circuit board to drive an additional solid state relay (SSR) and run a new PID algorithm. Note 220 Volt Models obviously have much greater system heat performance,
PID Setting: the machine’s PID algorithm has been completely re-written, resulting in a dramatic increase in
temperature stability and machine performance. These settings are now tuned and locked; in the past they were
available to the end user to adjust, this is no longer necessary and the option has been removed from the menu.
Upgraded parts; water inlet changed from plastic to copper; upgraded composition of rubber on 3-way vent tube
to alleviate oxidation and cracking; all solenoids are forged body to prevent any leaks as result of bulging o-rings.
Ultimately, these upgrades were made to reduce the cost of maintenance needed on the machine.
Reservoir Drip Tray & Removable Drip Tray are available as an accessory to the stock machine.
Product plus condensed:
- Standard European Ash Peruvian wood actuators & handles
- Glass touchscreen display
- Automatic shot timers
- Adjustable brew temperature
- Shot mirror
- Hot water tap
- Non-slip feet
- Variable flow rate
- Personalized steam pressure with PID & customizable wand tip
- Dual Boiler design with reliable power management systems
- Pre-heat coil for brew temperature stability
- Commercial portafilter with 58mm, 18g basket
- Bottomless (“naked”) chrome-plated, brass portafilters with 58 ml. portafilter baskets
- Teflon-coated shower screens for easy cleaning
- Universal stainless steel group bayonet
- PID temperature & pressure control, adjustable in 0.1º increments (Celsius or Fahrenheit)
- 1.1 ml, 4-hole steam wand tip
- Steam pressure transducer
- Saturated group with auto-bleed
- Internal gear pump
- Direct plumb only
- Certified ETL Sanitation* (conforms to NSF/ANSI Standard 4’)
Specifications
| Width | 18.1 “ |
| Depth | 23 “ |
| Height | 14.5″ |
| Weight | 100 lbs |
| Boiler Capacity |
Brew – 1.1 L Steam – 3.3 L |
| Power Supply + Absorption |
Voltage – 110 V : 220 V Amperage – 15 A : 10 A Wattage – 1300 W : 2000 W |
Please note that all colour options are depictions of the colour through your computer monitor care of Slayer’s product building program. The slayer catalogue has been supplied in resources as well. CaffeTech Canada will not be responsible for colour shades that do not match your exact expectations. Colours are considered custom options and all Custom options can take up to 12- 16 weeks. There are no cancellations on these custom orders. Please insure that you can wait the time required for professional customization through Slayer
Resources
Installation Requirements
Warranty Information
Colour Brochure
Wood Options
Explore more from our collection.
Reviews
There are no reviews yet.